1 6

Innox Meccanica

SALUMI WASHERS

SALUMI WASHERS

Avg-fed frames and sausage washers

Inox Meccanica’s salumi washers are ideal for washing and blowing salami, speck, bresaola, and other cured meats on trolleys, frames, or hanging sling bars on guide rails. 

The machine consists of a washing cabin which is equipped with a sling bar support rail and movable washing rods. 

The sling bars must be inserted in the right position in the washing system so that the special block (located inside the machine) can prevent the frame from moving during washing. The washing system consists of movable washing tubes placed inside the tunnel, on which the spray nozzles are placed. 

To enable the hams to be washed, the outer tubes rotate about 90 degrees, which allows the system to cover the entire area of the sling bar. The washing water, once used, is collected at the bottom of the machine and then discharged. The system that feeds these washing rods consists of a centrifugal pump with a stainless-steel body, which draws water, directly from the plant’s water supply. 

The washing pump and technical component are installed on the side of the tunnel. 

Want to know more?

If you would like more information about any of our machinery, or to book a demonstration, please contact our Technical Sales Team by emailing info@trunet-group.com, by calling +44 (0)1530 411275 or by clicking "Request a quote" below.

Download brochure Request a Quote

View full details

Technical data and layout

Features

  • Acoustic insulation
  • Reduced water consumption
  • High washing capacity
  • Reduced energy consumption
  • Gentle dirt removal

  • 01.

    Compressed air


    Dried compressed air should be used to avoid any possible inconvenience, resulting in production interruptions and damaged pneumatic components

  • 02.

    Water


    It is advisable that the water supply to the washing system be made with softened water

  • 03.

    Electric


    Based on the power installed on the washing system, it is essential that adequate protection be sized for the power supply

  • 04.

    Remote control


    Allows monitoring of working conditions and any alarms or anomalies encountered during machine operation

Details

Technology

  • Customised washing programs
  • Washing programs designed to achieve maximum energy efficiency
  • Responsible dosing of chemical solutions to protect the environment and operators involved in cart and chassis washing operations
  • Strong savings in energy, water and detergent consumption
  • Significant reduction in maintenance time and costs
  • Advanced systems for controlling and monitoring working conditions and any alarms or anomalies encountered during machine operation

Applications

Plants for washing cold cuts such as salami, bacon, bresaola, and others have a high technological value and are custom-designed to meet every requirement and production capacity

Features

  • Stainless steel structure
  • Selected raw materials of the highest quality
  • Choice of materials meeting high pharmaceutical standards
  • Technologically advanced system for fume extraction

Sectors

  • Meat industry

Washable equipment

Designed and manufactured specifically for the washing of cured meats, these systems are ideal for salami, bresaola, speck but also hams and some types of cheese

  • BRESAOLA

  • SALAMI

  • HAMS

  • SPECK

This is a team at your service to implement guidelines that will innovate food equipment washing processes.

Inox Meccanica are convinced that to improve technologies relating to washing processes and machines. To meet the needs of and the requirements of the food market, resources, technical potential, specific knowledge and, above all, the ability to ‘step into the shoes of others’ to solve the practical problems of potential customers.

This is why the Washing Solution Team has been created. The mission is the constant and progressive improvement of washing solutions and processes in line with the growing need for perfectly sanitised equipment, the reduction of resources being used (such as water, energy, and chemicals) and safeguarding the environment and operator safety.

In this team there are engineers, chemists, hygienists, customers, and suppliers who help Inox Meccanica achieve their goals. On the other hand, industrial washing is now a ‘multi-disciplinary science’ that requires many different skills that we want to implement internally and externally.

The Washing Solution Team logo is a symbol of the commitment to designing and manufacturing washing machine that are getting increasingly more geared to the needs of customers.

What can team

TruNet do for

you?

FIND OUT MORE